Installing an isofix child seat

Installing an isofix child seat  - Occupant safety - Range Rover Evoque Owners Manual - Range Rover Evoque

Installing an isofix child seat
Installing an isofix child seat

To install an ISOFIX child seat:
1. Locate the ISOFIX locking mechanism.

2. Slide the child seat into the locking mechanism.

3. If an upper tether is fitted to the child seat, ensure it is properly secured to the upper tether anchorages on the rear of the seats.

Test the security of the child restraint. To do this, attempt to pull the restraint away from the vehicle seat and twist the restraint from side to side. Even if the restraint appears secure, you should still check the anchor points visually, to ensure correct attachment.

Note: Always ensure that if an upper tether is provided, it is fitted and tightened correctly.

    See also:

    Classic Range Rover design cues, with a bold new interpretation
    The Evoque's bold exterior features exciting new interpretations of classic Range Rover design cues, including the signature clamshell bonnet, the floating roof and the solid 'wheel-at-each-corner ...

    Headlamp bulb replacement - halogen high beam
    NOTICE Take care not to touch this type of bulb with your fingers; always use a cloth to handle them. If necessary, clean the bulb with methylated spirits to remove fingerprints. 1. Twist an ...

    Selecting off-road height
    Off-road height can be selected by pressing up on the raise/lower switch (1) at any speed up to 24 mph (40 km/h). If selected, and the speed exceeds 30 mph (50 km/h), a warning will appear in the ...