Remote key fob battery replacement

Remote key fob battery replacement  - Entering the vehicle - Range Rover Sport Owners Manual - Range Rover Sport

Note: There are two designs of Smart Key, refer to the information which is relevant to the design of Smart Key supplied with the vehicle.

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message center.

To renew the battery:

To renew the battery:

1. Press and hold the release button.
2. Open the side cover.
3. Remove the battery drawer and remove the battery.
4. Fit a new CR2032 type battery (available from your Land Rover Retailer/Authorized Repairer), with the positive (+) side upwards.

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message center.

To renew the battery:

To renew the battery:

1. Slide the cover in the direction of the arrow until a click is heard. Remove the cover.
2. Use the emergency key blade to separate the Smart key body.
3. Fit a new CR2032 type battery (available from your Land Rover Retailer/Authorized Repairer), with the positive (+) side upwards.

Note: Avoid touching the new battery, as moisture/oil from fingers can reduce battery life and corrode the contacts.

Refit the parts in reverse order, ensuring that they click securely into place.

batteries must be disposed of correctly, as they contain harmful substances. SeekBattery disposal: Used batteries must be disposed of correctly, as they contain harmful substances. Seek advice on disposal from your Land Rover Retailer/Authorized Repairer and/or your local authority.

    See also:

    Pairing and connecting abluetooth device using thetouch screen
    1. Switch on your devices Bluetooth connection. Make sure that it is in Bluetooth discoverable mode, sometimes referred to as find me mode (see your devices operating instructions for more in ...

    Changing the cruise speed
    Decreasing speed To decrease the cruising speed, press and hold the - switch (3). Release the switch when the desired speed is reached, the new speed will be set and maintained. The set speed can ...

    Selecting access height
    To select access height from normal height, press down on the raise/lower switch. To select access height from Off-road height, press down on the switch once, and then a second time while lowering ...